[ ./ ]   [ ../ ]

A working config for DecServer 700

Here's just how to check it and how it should look like...
"Local>" is the DecServer's prompt, so everything after it can be assumed to be user's input...
2[thiemo@gea:~]> telnet serial-01
Trying 10.0.1.241...
Connected to serial-01.ham01.thiemo.net.
Escape character is '^]'.

[press return once]

# [enter password here]

Network Access SW V2.0 for DS700-16 (BL10-40)

(c) Copyright 1996, Digital Equipment Corporation - All Rights Reserved

Please type HELP if you need assistance

Enter username> thiemo

Local>  set priv
Password> [enter priviledged password here]
Local> show port 1

Port  1:                               Server: SERIAL-01

Character Size:            8           Input Speed:               9600
Flow Control:            XON           Output Speed:              9600
Parity:                 None           Signal Control:        Disabled
Stop Bits:           Dynamic           Signal Select:  CTS-DSR-RTS-DTR

Access:               Remote           Local Switch:              None
Backwards Switch:       None           Name:                    PORT_1
Break:              Disabled           Session Limit:                2
Forwards Switch:        None           Type:                      Soft
Default Protocol:       Dial           Default Menu:              None
                                       Dialer Script:             None
                                       Preferred Service: None
                                       
                                       Authorized Groups:   0
                                       (Current)  Groups:   0
                                       
                                       Enabled Characteristics:
                                       DTRwait,  Failover,  Input Flow
Control,  Lock,  Loss Notification,
Message Codes,  Output Flow Control,  Verification

Local> show port 1 status

Port  1:                               Server: SERIAL-01

Access:        Remote                  Current Service:                   
Status:          Idle                  Current Node:                      
Sessions:           0                  Current Port:                      

Input XOFFed:      No                  Output Signals: DTR RTS
Output XOFFed:     No                  Input Signals:  CTS DSR RXD

Local> show listener 2001

Listener TCP-port:  2001                     Listener Type:  TELNET 
Identification:     sunrise console
Ports:              1
Connections:        Enabled 

Local> logout
Connection closed by foreign host.

That's pretty much it. Now we can test the thing...
3[thiemo@gea:~]> telnet serial-01 2001
Trying 10.0.1.241...
Connected to serial-01.ham01.thiemo.net.
Escape character is '^]'.

<#0> ok banner
SPARCserver 1000E, No Keyboard
ROM Rev. 2.30, 1280 MB memory installed, Serial #77?????.
Ethernet address 8:0:20:??:??:??, Host ID: 80??????.



<#0> ok  [press ^]]
telnet> [press ^D]Connection closed.

Geeez! It works.
Last updated: 2004-05-03--14:20
[ ../ ] [Homepage] [What's new?] [Projects] [Sitemap] [Legal Notes]

Did not find what you were looking for? Drop me a mail...
© 1997-2009 T. Nordenholz <list+l021q801jl1ip5w0@thiemo.net >  (This mail address is valid until 29 Mar 2010 (explanation))